TX-R7516 receiving card Ver2.0.0
Classification:
key word:
TX-R7516 receiving card Ver2.0.0
TX-R7516 receiving card Ver2.0.0
Features
- With 5V anti-reverse protection function.
- It has the self-recovery protection function of board-level power supply short circuit.
- Unique LEDID interface identification function. It can automatically identify the parameters of the LED display unit board, and can restore all the parameters and project files of the display with one key when replacing the receiving card.
- With dual network cable hot backup function. The switching time of the main and standby network cables is less than 0.1ms. After the signal of the main network cable is lost, it can be switched to the standby network cable within 0.1ms, and there is no lag when switching.
- One-key self-test function. When multiple cards are cascaded, you only need to press the self-test button on the first card, then all subsequent cards can enter the self-test state, and the receiving card can automatically exit the self-test state when it detects that there is a signal input from the network.
- Each output line has a resistance current limiting protection function, and the load is balanced.
- Support module rotation control function. The module can be installed by rotating 90°, 180°, and 270°, and the receiving card can control its normal display.
- Unique UPWM function. It can make the ordinary general-purpose constant current source chip screen achieve a high refresh rate, and the color performance is richer.
- Super large loading point-by-point brightness and color correction function. Real 256-level brightness and chromaticity point-by-point correction, brightness correction area 256*384.
- Support various scanning and various snap mode unit boards, through the screen wiring settings, it can match the display unit boards with any wiring method.
- The shift clock of the unit board is optional from 1M-25M, and the gray scale is from no gray scale to 65536
- Level grayscale is optional, refresh frequency 60Hz-3980Hz is optional. It has 32 groups of red, green and blue outputs. According to different scanning methods, the controllable height is different, and the maximum can reach 1024 lines.
Technical Parameters
Product name: TX-R7516
Power input: DC5V
Signal input: any RJ-45 port, 1 port is preferred
Cascade signal output: any RJ-45 port
Data output:
32 sets of RGB data, CLK, LAT, EN, A, B, C, D
Transmission medium: super category 5 network cable
Working instructions: power indicator light, signal indicator light
Working temperature: -20ºC-70ºC
Dimensions: 144mm X 91mm
Installation method: fixed hole type
