DOWNLOAD
DOWNLOAD CENTER
File name
Illustrate
File size
Version
Operate
The system composition of a 3D LED screen is usually a 3D splicing processor, a 4-port sending card, and a receiving card. The usual debugging process is to complete the driver setting of the receiving card to the module in the normal mode (2D, 60Hz), and then perform 3D 120Hz debugging. This article mainly describes how to set the 3D mode of the sending card and receiving card.
586.7KB
UG014
The receiving card with onboard 75 interface usually does not need to set the port data output mode. The software generally defaults to a parallel 24-group data mode. If the half-fold mode is used, or port settings (such as port switching) are required, the data output mode needs to be set according to the specific model of the receiving card.
664.4KB
UG009
Jucheng receiving card TX-R75-12 has 12 75 output ports on board, that is, 24 sets of parallel data. Jucheng receiving card TX-R75-16 has 16 75 output ports on board, namely 32 sets of parallel data. Jucheng receiving card TX-SR3L has four 26P interfaces on board, which can be configured as any of the three modes of 16, 20 or 24 sets of parallel data. In the following, 24 sets of parallel data are commonly used as an example. The processing methods of 16 sets of parallel and 32 sets of parallel data are similar to those of 24 sets, and the description will not be repeated.
977.9KB
UG007
ucheng receiving card TX-R75-12 has 12 75 output ports on board, that is, 24 sets of parallel data. Jucheng receiving card TX-R75-16 has 16 75 output ports on board, namely 32 sets of parallel data. Jucheng receiving card TX-SR3L has four 26P interfaces on board, which can be configured as any of the three modes of 16, 20 or 24 sets of parallel data.
934.0KB
UG005
Usually the module is installed normally, and the data is transmitted from right to left from the front, but in some special occasions, such as curved screens and column screens, the modules will be rotated and installed vertically. This article takes the TX-R75-12 connection as an example to explain how to set the receiving card when the module is installed vertically.
1.0MB
UG004
Official account
LED sprite
Nanjing Jucheng Electronic Technology Co., Ltd
Mobile：025-84527485
E-mail：453865088@qq.com
Address: No. 5 Yonghe Road, Yangjiang Town, Gaochun District, Nanjing City