TX-R7508 receiving card Ver2.0.0
Classification:
key word:
TX-R7508 receiving card Ver2.0.0
TX-R7508 receiving card Ver2.0.0
Features
- With dual network cable hot backup function. The switching time of the main and standby network cables is less than 0.01s. After the signal of the main network cable is lost, it can be switched to the backup network cable within 0.01s, and there is no lag when switching.
- One-key self-test function. When multiple cards are cascaded, you only need to press the self-test button on the first card, then all subsequent cards can enter the self-test state, and the receiving card can automatically exit the self-test state when it detects that there is a signal input from the network.
- Support module rotation control function. The module can be installed by rotating 90°, 180°, and 270°, and the receiving card can control its normal display.
- UPWM function of ordinary constant current chip. It can make the ordinary general-purpose constant current source chip screen achieve a high refresh rate, and the color performance is richer.
- Super large loading point-by-point brightness and color correction function. True 256-level brightness and chromaticity correction point by point, brightness correction area 128*512.
- Supports various scanning methods below static-64 scanning, and supports various units of snapshot mode. Through the wiring setting of the screen body, it can cooperate with the display unit board of any wiring method.
- The shift clock of the unit board is optional from 1M-25M, and the gray scale is from no gray scale to 65536
- Level grayscale is optional, refresh frequency 60Hz-10000Hz is optional. It has 16 groups of red, green and blue outputs. According to different scanning methods, the controllable height is different, up to 512 rows, and the number of controllable columns varies with the clock, gray level, and refresh frequency, and the maximum controllable 512 columns.
Technical Parameters
Product name: TX-R7508
Power input: DC5V
Signal input: any RJ-45 port, 1 port is preferred
Cascade signal output: any RJ-45 port
Data output:
R7508: 16 groups of RGB data, CLK, LAT, EN, A, B, C, D
Transmission medium: super category 5 network cable
Working instructions: power indicator light, signal indicator light
Working temperature: -20ºC-70ºC
Dimensions: 112mm X 71mm

Unique all-encompassing protective case
Dimensions: 88mm X 142mm, same as standard card installation holes

