TX-T3H sending card Ver.1.2

TX-T3H is an HDMI input synchronous controller sending card specially developed for LED full-color displays.

Classification：

Send Card

key word:

Immediately consult

File Download

TX-T3H sending card Ver.1.2

product description

TX-T3H is an HDMI input synchronous controller sending card specially developed for LED full-color displays.

Features

One HDMI input. The card can be directly connected to the HDMI output of the graphics card, set-top box, video processor, etc., and complies with the HDMI transmission characteristic specification. At the same time, if the computer only has DVI output, you can also use DVI to HDMI compatibility mode.
PCI-E board design, can be easily inserted into the PCI-E slot of the computer or inside the video processor, does not occupy the external space of the computer, and avoids easy damage caused by small unfixed external boxes placed on the computer table or the host computer. problems such as falling.
Supports a variety of conventional computer resolutions, and also supports custom resolutions, up to 3072*640 resolution.
High-order video source loading capability, supporting 24bit and 36bit video sources.
Possesses the ability to load a large number of display screen points. With 3 Gigabit Ethernet port outputs, a single card can carry a display with 1.95 million dots, which is 650,000 more dots than the output of the original sending card with two network ports. When the display screen is less than 1.3 million points, one more spare network port can be added. The three network ports can be used independently, or they can be set as the same output for redundancy. Each output port can control any combination of width and height within the range of 650,000 points. The number of rows and columns controlled can be set arbitrarily.
The difference between this sending card and other similar sending cards is that three network ports can be used to control the display screens of three different cell board models. When the customer uses three different display screens placed in different locations and the control room is together, the cost of using the sending card can be minimized.
USB interface control, multiple cards can be cascaded to combine to load a larger display, for example, when a display has 3.8 million dots, it can be cascaded for unified control.
The card has a unique running time protection lock function, and the password is saved by the customer. After enabling this function, the card and the receiving card on board can be locked due to expiration, and cannot be decrypted except for the customer password.

Technical Parameters

Product name: TX-T3H

Power input: DC+5V

Signal input: HDMI

Signal output: Gigabit network mode

Control mode: CP210X USB-RS232 interface

Transmission medium: super category 5 network cable

Transmission distance: up to 140 meters, measured 170 meters.

Working temperature: -20ºC-70ºC

Dimensions: 132mm X 99mm

Installation method: computer PCI-E slot card type.